Acrylic material CP051
Product Introduction
Acrylic material CP051 is water-born and highly permeable emulsions.
Applied mixed with silica sand, will effectively enhance the site strength and smoothness.
Technical Data
Item | Data |
viscosity（25℃，mpa·s） | 4000~10000 |
Solid content（%） | ≥ 99 |
Applicable period（25℃，min） | ≥ 60 |
Curing time（25℃，h） | ≤ 24 |
tensile strength（MPa） | ≥1.8 |
Elongation at break (%) | ≥30 |
Impermeability (Mpa) | ≥0.8 |
Bonding strength(Mpa) | ≥1.0 |
Application:
For tennis court, basketball court, volleyball court acrylic material middle layer.
Composition:
Chemical Name | In % by Weight | CAS No. CAS | EC No. EC | Molecular Formula |
4-HYDROXYLATED ACRYLIC RESIN | 88.8% | 2478-10-6 | 219-606-3 | C7H12O3 |
Methyl acrylate | 10% | 96-33-3 | 202-500-6 | C4H6O2 |
4,4'-Diphenylmethane diisocyanate | 1% | 101-68-8 | 202-966-0 |
|
water | 0.2% | 7732-18-5 | 215-185-5 | H2O |
Packaging And Storage
Packing: 25kg/drum
Stored in a cool, ventilated and dry warehouse, keep away from fire and heat sources, and keep waterproof, damp proof and light proof.
Storage period: six months from the date of production. More than the storage period, the test can continue to use.
Installation
1) It should apply 2 layers by squeegee. 2layers total usage is 0.5kg/㎡
2) The first layer: 0.3kg CP051 material mix +0.3kg silica sand +0.015kg cement+0.3kg water mix and stir evenly, after 10hours cured, it will become 1mm.
3) The second layer: 0.2kg CP051 material mix +0.2kg silica sand +0.01kg cement+0.2kg water, mix and stir evenly, after 10hours cured, it will become 0.6mm.
Note:
1) According to the basis of construction and weather conditions, the amount of sand and water will be adjusted appropriately, the ground surface is rough, and at the same time, more quartz sand will be added. When the temperature is high, some water can be added to the ground.
2) During the curing, there may be falling leaves or other winds into the venue of the debris, the formation of solidified layer, must be completely clean.
3) The uncured material should not touch the skin for a long time. If you accidentally enter the eyes, rinse with plenty of water and go to the doctor in time;
4) This product is a chemical product. It is forbidden to be eaten. It is forbidden to be implanted in the body, so as to avoid child contact.
5) In case of fire, it is recommended to use powder, carbon dioxide or foam fire extinguishing agent. Firefighters should be protected.
