Company name : Foshan GRK Commercial CO LTD
Address: No.5-1 YongxingXiang Yanjiang Road Gaoming district Foshan China 528500
Tel./WhatsApp: +86 13660776067 or +86 13726309092
Country of Original: China
Province /State: Guangdong
City: Foshan City
Sturcture for Light Duty Epoxy paint flooring
--Polish the subbase
Modern factories have very high requirements on floors. Generally, bright and clean floors are required, but there is a lack of funds. For non-heavy-loaded areas, epoxy flat coating can be selected. It consists of primer, middle layer and top coat, and is mainly used for new cement floors with smooth ground and high ground strength.
Group A is colored liquid, Group B is colorless liquid,
Two-component material, used together.
The construction is convenient and the price is cheap.
After completion, it can achieve a smooth and smooth effect.
Primer is 1:1
Middle layer is 4:1
Top coat is 4:1
Scope of Application
Non-heavy-loaded grounds such as workshops, offices, warehouses, food factories, etc.
Primer 0.15kg/sqm, Middle layer 0.1kg /sqm ,Top coat 0.2 kg/sqm.
Ground Requirements before Construction
Flat, high ground strength
After correct construction and curing, it can achieve smooth and smooth effect, uniform color, no construction marks, no bubbles, no shrinkage holes, no impurities, etc. However, some defects caused by improper operation and other subjective and objective reasons are not excluded.
This product is a chemical that is harmful or fatal if swallowed, seek medical advice immediately if swallowed. In case of accidental contact with eyes, rinse with plenty of water. In severe cases, seek medical attention immediately. Pay attention to precautionary measures, fire and explosion protection, and the disposal of residues should comply with relevant national or local government safety regulations.
Store at room temperature of 10°C-30°C, humidity 50%-80%; all materials are placed in a fixed position and marked in this area to avoid confusion. The warehouse is well ventilated and the temperature is at room temperature. Open paint and leaking materials are stored separately and marked.
Primer Group A 18kg,Group B 18kg,
Middle layer Group A 24kg,Group B 6kg,
Topcoat Group A 24 kg, Group B 6 kg.